»  Features:

• Support 2 Wiegand signal.
• Able to work as standalone device for door access while 16 Doors Main Control Device (WIT-0016A) is disconnected.
• Disorder of 1 of the 16 readers will not affect the rest 15 readers door access function.
• While WIT-0016A to RS485 is disconnected, 16 readers are still able to work as standalone device for normal door access.
• Disconnection or re-connect of any single reader will not affect other normal readers report sending, and will not affect other normal readers door access function.
• New legal card ID can be created and deleted through AP port, Smart learning function available (legal card no. will be checked and saved under legal card buffer under connected mode, card no. can be deleted from AP port).
• Card reader mode: connected to main control device, polling readers by main control device communication setting. Door open by main control device after reading card or key data.
• Standalone reader mode: Auto change to standalone reader mode, while reader detect disconnection to main control device up to 10 seconds (default time, adjustable 1~225 seconds). Door open control by reader after card reading.
• Node ID can be setup with DIP switch.
• Anti-damage function for main control device and readers, Door-not-close alarm setting for higher safety level.
• Relay and sensor status can be changed(NO/NC, ON/OFF, PULSE).